Springfield Armory SAINT & SAINT EDGE Short-Barreled Rifles

 Springfield Armory’s SAINT AR-15 series expands to include the SAINT SBR and SAINT EDGE SBR, featuring an 11.5” CMV government profiled 1:8 twist barrel that is Melonite® finished inside and out for the ultimate in corrosion resistance. This configuration was selected as the best balance between length and ballistic performance of the 5.56 cartridge.

 The SAINT with its forged lower receiver and the SAINT EDGE with its lightened billet lower, provides superior accuracy thanks in part to a free-float handguard featuring Springfield’s rock-solid proprietary attachment system. With four attachment points anchoring it to the barrel nut, this M-Lok compatible handguard was designed to withstand the hard use of law enforcement and military operations. Under the handguard is Springfield’s pinned multi/mode adjustable gas block for suppressed or unsuppressed use.

 Forged from aircraft grade 7075 T6 aluminum and Type III hard coat anodized, the lower receiver is equipped with the Accu-Tite™ tension system, which reduces movement between the upper and lower receiver. No corners were cut on the MPT (magnetic particle tested) enhanced M16 bolt carrier group – the heart of any premium AR. This BCG is finished with super-hard Melonite® and carries a 9310 steel bolt.

 The GI trigger on the SAINT SBR is nickel boron coated for a smooth, grit-free feel, and the Bravo Company stock, pistol grip and Magpul Gen M3 PMAG are right at home on this combat grade short-barreled rifle. A single-sided 90 degree safety, GI charging handle and A2 flash hider complete the package.

 Meanwhile, the SAINT EDGE SBR billet lower features QD mounts machined into the receiver and weight reducing cuts that lighten it by two ounces. An ambidextrous 90-degree safety and extended mid-sized charging handle add features that are popular among tactical shooters. The trigger is an exclusive proprietary short-reset single stage design with a crisp and precise feel. A Bravo Company stock, pistol grip and Magpul Gen M3 PMAG finish off this combat grade short-barreled rifle.

 Both rifles are ideal for a home defense. Light, tight and short.

ST9115556B_R

SAINT SPECS


CALIBER 5.56x45mm (.223 REM)


LENGTH 27.5″ – 30.75″


WEIGHT 5 lbs 9 oz


UPPER RECEIVER SA Forged Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum Flat Top w/ Forward Assist & M4 Feed Ramps


LOWER RECEIVER SA Forged Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum w/ Accu-Tite™ Tension System & Receiver End Plate w/ QD Swivel Attachment


BARREL 11.5″ CMV, Melonite® Internally & Externally, A2 Flash Hider / 1:8 Twist


GAS SYSTEM SA Proprietary Low Profile Carbine Length Adjustable Gas Block


TRIGGER SA Proprietary, Nickel Boron Coated GI Style


SIGHTS Not Included


TRIGGER GUARD Bravo Company


PISTOL GRIP Bravo Company Gunfighter Mod 3


HANDGUARD Full Length Aluminum Free Float Handguard w/ M-Lok Attachment Points


BUTT STOCK Bravo Company Gunfighter


BUFFER ASSEMBLY Carbine “H” Heavy Tungsten Buffer


RECEIVER EXTENSION Mil-Spec Carbine, 7075 T6 Type III Hard Anodized Aluminum


CHARGING HANDLE GI Style


BOLT CARRIER GROUP Enhanced M16 Melonite® Finish, MPT, 9310 Steel Bolt


MAGAZINE 1 – 30 Round Magpul PMAG


CASE Soft Rifle Case


MSRP $1,049.00 here

STE9115556B_R

SAINT EDGE SPECS


CALIBER 5.56x45mm (.223 REM)


LENGTH 27.5″ – 30.75″


WEIGHT 5 lbs 9 oz


UPPER RECEIVER SA Forged Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum Flat Top w/ Forward Assist & M4 Feed Ramps


LOWER RECEIVER SA Billet Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum w/ Accu-Tite™ Tension System & Receiver End Plate w/ QD Swivel Attachment


BARREL 11.5″ CMV, Melonite® Internally & Externally, A2 Flash Hider / 1:8 Twist


GAS SYSTEM SA Proprietary Low Profile Carbine Length Adjustable Gas Block


TRIGGER SA Proprietary, Modular Match Grade Short Reset Single Stage


SIGHTS Not Included


TRIGGER GUARD Integral to Receiver


PISTOL GRIP Bravo Company Gunfighter Mod 3


HANDGUARD Full Length Aluminum Free Float Handguard w/ M-Lok Attachment Points


BUTT STOCK Bravo Company Gunfighter


BUFFER ASSEMBLY Carbine “H” Heavy Tungsten Buffer


RECEIVER EXTENSION Mil-Spec Carbine, 7075 T6 Type III Hard Anodized Aluminum


CHARGING HANDLE Mid-Size


BOLT CARRIER GROUP Enhanced M16 Melonite® Finish, MPT, 9310 Steel Bolt


MAGAZINE 1 – 30 Round Magpul PMAG


CASE Soft Rifle Case


MSRP $1,299.00 here

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s