Springfield Armory SAINT & SAINT EDGE Short-Barreled Rifles

Looking for a light, tight and quick-handling short-barreled rifle? The SAINT SBR and the SAINT EDGE SBR is just for you.

Advertisements

 Springfield Armory’s SAINT AR-15 series expands to include the SAINT SBR and SAINT EDGE SBR, featuring an 11.5” CMV government profiled 1:8 twist barrel that is Melonite® finished inside and out for the ultimate in corrosion resistance. This configuration was selected as the best balance between length and ballistic performance of the 5.56 cartridge.

 The SAINT with its forged lower receiver and the SAINT EDGE with its lightened billet lower, provides superior accuracy thanks in part to a free-float handguard featuring Springfield’s rock-solid proprietary attachment system. With four attachment points anchoring it to the barrel nut, this M-Lok compatible handguard was designed to withstand the hard use of law enforcement and military operations. Under the handguard is Springfield’s pinned multi/mode adjustable gas block for suppressed or unsuppressed use.

 Forged from aircraft grade 7075 T6 aluminum and Type III hard coat anodized, the lower receiver is equipped with the Accu-Tite™ tension system, which reduces movement between the upper and lower receiver. No corners were cut on the MPT (magnetic particle tested) enhanced M16 bolt carrier group – the heart of any premium AR. This BCG is finished with super-hard Melonite® and carries a 9310 steel bolt.

 The GI trigger on the SAINT SBR is nickel boron coated for a smooth, grit-free feel, and the Bravo Company stock, pistol grip and Magpul Gen M3 PMAG are right at home on this combat grade short-barreled rifle. A single-sided 90 degree safety, GI charging handle and A2 flash hider complete the package.

 Meanwhile, the SAINT EDGE SBR billet lower features QD mounts machined into the receiver and weight reducing cuts that lighten it by two ounces. An ambidextrous 90-degree safety and extended mid-sized charging handle add features that are popular among tactical shooters. The trigger is an exclusive proprietary short-reset single stage design with a crisp and precise feel. A Bravo Company stock, pistol grip and Magpul Gen M3 PMAG finish off this combat grade short-barreled rifle.

 Both rifles are ideal for a home defense. Light, tight and short.

ST9115556B_R

SAINT SPECS


CALIBER 5.56x45mm (.223 REM)


LENGTH 27.5″ – 30.75″


WEIGHT 5 lbs 9 oz


UPPER RECEIVER SA Forged Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum Flat Top w/ Forward Assist & M4 Feed Ramps


LOWER RECEIVER SA Forged Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum w/ Accu-Tite™ Tension System & Receiver End Plate w/ QD Swivel Attachment


BARREL 11.5″ CMV, Melonite® Internally & Externally, A2 Flash Hider / 1:8 Twist


GAS SYSTEM SA Proprietary Low Profile Carbine Length Adjustable Gas Block


TRIGGER SA Proprietary, Nickel Boron Coated GI Style


SIGHTS Not Included


TRIGGER GUARD Bravo Company


PISTOL GRIP Bravo Company Gunfighter Mod 3


HANDGUARD Full Length Aluminum Free Float Handguard w/ M-Lok Attachment Points


BUTT STOCK Bravo Company Gunfighter


BUFFER ASSEMBLY Carbine “H” Heavy Tungsten Buffer


RECEIVER EXTENSION Mil-Spec Carbine, 7075 T6 Type III Hard Anodized Aluminum


CHARGING HANDLE GI Style


BOLT CARRIER GROUP Enhanced M16 Melonite® Finish, MPT, 9310 Steel Bolt


MAGAZINE 1 – 30 Round Magpul PMAG


CASE Soft Rifle Case


MSRP $1,049.00 here

STE9115556B_R

SAINT EDGE SPECS


CALIBER 5.56x45mm (.223 REM)


LENGTH 27.5″ – 30.75″


WEIGHT 5 lbs 9 oz


UPPER RECEIVER SA Forged Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum Flat Top w/ Forward Assist & M4 Feed Ramps


LOWER RECEIVER SA Billet Type III Hard Coat Anodized Aircraft Grade 7075 T6 Aluminum w/ Accu-Tite™ Tension System & Receiver End Plate w/ QD Swivel Attachment


BARREL 11.5″ CMV, Melonite® Internally & Externally, A2 Flash Hider / 1:8 Twist


GAS SYSTEM SA Proprietary Low Profile Carbine Length Adjustable Gas Block


TRIGGER SA Proprietary, Modular Match Grade Short Reset Single Stage


SIGHTS Not Included


TRIGGER GUARD Integral to Receiver


PISTOL GRIP Bravo Company Gunfighter Mod 3


HANDGUARD Full Length Aluminum Free Float Handguard w/ M-Lok Attachment Points


BUTT STOCK Bravo Company Gunfighter


BUFFER ASSEMBLY Carbine “H” Heavy Tungsten Buffer


RECEIVER EXTENSION Mil-Spec Carbine, 7075 T6 Type III Hard Anodized Aluminum


CHARGING HANDLE Mid-Size


BOLT CARRIER GROUP Enhanced M16 Melonite® Finish, MPT, 9310 Steel Bolt


MAGAZINE 1 – 30 Round Magpul PMAG


CASE Soft Rifle Case


MSRP $1,299.00 here

CMMG’s Mk4 Banshee

Short barreled Mk4 Banshee by CMMG Inc., the leading AR-15 manufacturer.

 Recently CMMG introduced their short barreled rifle Mk4 Banshee. Missouri made rifle is chambered in .22LR, 9mm, 45ACP or 300BLK. Its design gives you the firepower you need in a compact and lightweight platform. Personally, 300BLK looks promising.

Some notable points:

  • The Banshee line is composed of short-barreled rifles and AR pistols.
  • As expected, the SBRs require NFA registration and tax stamp.
  • The guns are among the smallest and lightest in CMMG’s catalog.
  • The pistol-caliber Banshees weighs in at just over 4.5 pounds, while the rifle caliber is just over 5 pounds.
  • The Banshee is available in four calibers: .22LR, 9mm, .45 ACP and .300 Blackout.
  • The SBR configurations come with CMMG’s innovative Fastback stock.
  • The 9mm and .45 ACP feature the company’s pioneering Radial Delayed Blowback operating system.
  • The Banshee runs from $1,149.95 to $1,499.95.
  • RipStock™ Stock and Receiver Extension
  • RML Handguard
  • Premiere Cerakote finish standard
  • Ambi Charging Handle
  • Ambi Selector
  • Ambi Sling plate
  • Magpul MOE Pistol Grip
  • Magpul MVG Foregrip

You can order it here

AlphaWolf Pistol Caliber Carbine Available NOW

AlphaWolf Pistol Caliber Carbine Available NOW

 Lone Wolf Distributors Inc. now shipping all AlphaWolf Carbine pre-orders. The carbine is available in 9mm, 45 ACP cartridge and 10″ or 16″ barrel.  Designed specifically targeting accuracy, strength and reliability. You can order it from Lone Wolf R&D here.

ThumbnailHandler.ashx-2

The AW-PCC is an AR-15 model platform which sports a rotating, locking bolt operating system, side charging, short stroke gas piston system instead of a straight blowback design.  The short stroke gas piston system eases recoil with the reciprocating mass resulting in quicker follow up shots, compared to a heavier, rearward force, blowback system.  The AW-PCC uses a standard AR/M4 fire control group for ease of training. These combined features produce an absolute reliable, cleaner, quieter, smoother and structurally sound carbine.

ThumbnailHandler.ashx

Product Features:

  • Short stroke, gas piston operation
  • Rotating/locking bolt operating system
  • Side charging system
  • Proprietary hand guard uses M-Lok rail system to easily mount accessories
  • Proprietary receiver uses billet 6061 T6 Aluminum for structural integrity
  • 16″ standard, or 10″ pistol threaded barrel for either flash hider or suppressor
  • AW-PCC w/16″ barrel and extended buttstock is 34 1/2″
  • AW-PCC w/16″ barrel without extended buttstock is 32″
  • 16/1 button cut, non-chrome lined threaded barrel (*thread protector included/ thread pitch of .578×28 45 ACP and 1/2×28 9mm)
  • Standard AR/M4 fire control group for ease of training
  • Low recoil and accurate
  • Glock magazine included (13rd for 45 ACP) (17rd for 9mm)
  • 100% US manufactured

Stag 15 Bones Series Sale

Stag 15 Bones Series Sale

Stag 15 Bones Series
 Build your ideal AR15 from Stag Arms high quality, durable Stag 15 Bones Series. Built around a 16″ 1/7 twist chrome lined barrel and 7075 T6 Aluminum receivers, these Mil-Spec AR15 Rifles and Rifle Kits give you the perfect base and allow you to customize to the rifle that you want.
Stag 15 Bones Rifle
Stag 15 Bones Rifle
Left
Was $759.99
Now $569.99
BUY NOW
Right
Was $714.99
Now $539.99
BUY NOW
Stag 15 Bones Rifle Kit
Stag 15 Bones Rifle Kit
Left
Was $529.99
Now $449.99
BUY NOW
Right
Was $489.99
Now $419.99
BUY NOW

Stag Arms AR15 Deals

Stag Arms AR15 Deals

Stag 15 MOD 2T
Stag 15 MOD 2T
Was $1049.99
Only $649.99
 Designed with the tactical operator in mind, the Stag 15 MOD 2T checks off all the fundamental requirements in a tactical rifle. A 16” 1/9 twist chrome lined barrel is protected by the Samson Star-C carbine-length free float quad rail. The picatinny quad rails are perfect for the attachment of sights, optics, and accessories that the shooter may require.
Limited Quantity Available
BUY NOW
Stag 15 MOD 3
Stag 15 MOD 3
Was $799.99
Only $499.99
 The Stag 15 MOD 3 is built to perform in any condition and achieves the highest standards of reliability. Constructed around 7075 T6 Aluminum receivers, 16” 1/9 twist chrome lined barrel and M16 Bolt Carrier Group.
Limited Quantity Available
BUY NOW

Anderson Manufacturing AM15-BR

The AM15-BR, 5.56 16″ –  entry level AR15 manufactured by Anderson Manufacturing. Affordable American made quality rifle.  If retail price $499.00, dealer price could be even less.

The AM15-BR, 5.56 16″ –  entry level AR15 manufactured by Anderson Manufacturing. Affordable American made quality rifle.  If retail price $499.00 here, dealer price could be even less.

SPECIFICATIONS & FEATURES

  • ACTION:  Semi-Automatic
  • CALIBER: 5.56 NATO
  • MAGAZINE CAPACITY: (1) 30rd
  • FINISH: Black Anodize
  • WEIGHT: 6.2lbs
  • OVERALL LENGTH: 32 ½”, 36 1/8” Extended
  • BARREL LENGTH: 16″ M4 Contour
  • RIFLING: 1:8
  • RECEIVERS: 7075-T6 Forged
  • BCG: AM-15 Bolt Carrier Group – .223
  • CHARGING HANDLE: Standard Charging Handle
  • GAS BLOCK: Low Profile
  • FLASH HIDER: A2
  • FOREARM: A2 Plastic Hand Guard
  • FRONT SIGHT: None
  • PISTOL GRIP: A2
  • BUTT STOCK: M4 Anderson
  • ADDITIONAL SPECS/NOTES: Barrel is compatible with .223 Ammunition.

Optic-Ready-2

Stag Arms 15 Valkyrie Sale

Stag Arms 15 Valkyrie Sale

Happy .224 Day!
Stag 15 Valkyrie Sale
Plus FREE Extra Magazine!
 The Stag 15 Valkyrie utilizes the all-new 224 Valkyrie cartridge, created by Federal Premium Ammunition, allowing for maximal performance from the Stag 15 platform. Built around an 18” 416R Stainless Steel Fluted Heavy Barrel, the 224 Valkyrie cartridge provides less wind drift and drop than all other loads in its class and stays supersonic past 1,300 yards.
Stag 15 Valkyrie Rifle
Stag 15 Valkyrie Rifle
Left
Was $1619.99
Now $1329.99
BUY NOW
Right
Was $1574.99
Now $1289.99
BUY NOW
Stag 15 Valkyrie Upper
Stag 15 Valkyrie Upper
Left
Was $619.99
Now $569.99
BUY NOW
Right
Was $619.99
Now $569.99
BUY NOW
Stag 15 Valkyrie Rifle Kit
Stag 15 Valkyrie Rifle Kit
Left
Was $1239.99
Now $1129.99
BUY NOW
Right
Was $1199.99
Now $1099.99
BUY NOW

Barska Optics SWAT Scope DEAL only $329.99 (RP $642.90) FREE Shipping

Barska Optics SWAT Scope 1-6×32 Illuminated Reticle, 35mm Scope -FREE Shipping!

 The 1-6x32mm SWAT-AR Riflescope by Barska has been specifically designed for tactical AR rifles such the M4 and AR-15. A red/green illuminated mil-dot reticle keeps you on target in low-light situations, and the built-in sniper edge helps reduce glare off of the objective lens.

The SWAT-AR 1-6×32 IR has been specifically designed for tactical rifles such as the popular AR-15 platform, and the compact size and low profile make the SWAT-AR 1-6×32 a great addition to any flattop AR-15 rifle. Included with the SWAT-AR riflescope is a 35mm cantilever scope mount, which places the SWAT-AR just forward of the rifles charging handle.

The 1-6x zoom of the SWAT-AR makes it ideal for close to mid-range targeting, and the illuminated Mil-Dot reticle gives the shooter an advantage in low light situations. The shooter is able to switch between a red or green reticle and adjust the brightness to find the optimal reticle for the environment. The fully multi-coated optics of this scope series aims to provide the shooter with a sharp, clear image with great contrast. The SWAT-AR 1-6×32 also comes nitrogen purged and o-ring sealed for complete waterproof and fogproof protection.

Other features of the SWAT-AR 1-6×32 IR scope includes external locking windage and elevation turrets and an angled sniper edged sunshade. The external locking turrets allow the user to quickly make adjustments to the scopes windage and elevation settings, and then have the ability to lock them into place to prevent any unintentional movement. The angled sniper edged sunshade significantly reduces glare and provides the user with a clearer view. Flip-up scope caps and battery are also included.

Features:

– Red/Green Illuminated Reticle w/ Adjustable Brightness
– Quick On/Off Push Button Design
– 35mm Tube Design
– Angled Sniper Edge Sun Shade
– 1-6x Zoom
– Lockable Windage/Elevation Turrets
– 35mm Cantilever Scope Mount
– Flip-Up Scope Caps and Lithium Battery

Specifications:

– Magnification: 1-6x
– Objective Lens: 32mm
– Fogproof: Yes
– ReticleGlass: Etched Mil Dot IR
– Exit Pupil: 22mm-6mm
– Optical Coating: Fully Multi-Coated
– Eye Relief: 99mm-129mm
– Click Value: 1/4 M.O.A.
– Tube Diameter: 35mm
– Finish: Black Matte
– Length: 11.5
– Included Accessories: Flip-Up Scope Caps, 35mm Cantilever Scope Mount
– Warranty: Limited Lifetime Warranty

The discount is on Blue Ridge Firearms website

Seekins Precision NXP8

This is an AR-style pistol chambered in 300 BLK with a match grade 8″ barrel. It is equipped with the SB Tactical PDW pistol brace and 7″ NOXs handguard with M-LOK attachment points. The MSRP is $1,879. Seekins tells me these will ship in February. You can pre-order them now.

 Originally designed at the specific request of a government end-user as a PDW, the NXP8 offers a discreet and portable advantage to those seeking a concealable weapon with enhanced capabilities.

 Precision CNC machined from solid billet aluminum and exceeding the standard military specifications, the NXP8 comes standard with a match grade 416-5R precision rifle barrel, chambered in 300 blackout with a 1:7 twist rate. Equipped with the newly designed 7″ NOXs M-LOK handguard, an adjustable pistol length gas system and ambidextrous controls for ease in operations. The NXP8 can be tuned to function in either suppressed or unsuppressed applications while offering exceptional accuracy.

seekins_15

 

  • 8″ Match grade 5R stainless steel barrel chambered in 300BLK.
  • 7″ NOXs handguard
  • 7075-T6 Billet aluminum
  • Ambidextrous controls
  • SB-Tactical PDW pistol stabilizing brace
  • 5.95 weight

seekins_14.png

SPECIFICATIONS

  • TOCK PDW Pistol Brace
  • CHARGING HANDLE DNA
  • FEED RAMP M4
  • BCG Std melonite M16 .300 blackout
  • LOWER SP223 Billet Ambi Lower
  • UPPER NX15 Skeletonized
  • HANDGUARD 7″ NOXs
  • GAS BLOCK Adjustable
  • GAS TUBE Melonited Pistol Length
  • MUZZLE DEVICE Nest Flash Hider

seekins_13

Get one of these babies over here